how to change a moen filter

Changing the Moen filter depends on the type of water filtration used by the faucet.
Moen uses two types of filters inside the faucet spout, and they also have a sink filter.
You should be familiar with the type of filter used by the faucet.
If there is a filter cartridge under the sink, you need a filter cartridge under the sink.
If there is no ink cartridge under the sink, you need one of the two faucet nozzle cartridges.
Moen recommends changing the filter every six months.
Turn off the water supply of the faucet under the sink.
The closing valve handle turns clockwise to stop the flow of water.
Turn the faucet mouth counter-clockwise and open it from the mouth.
Pull the faucet head with filter cartridge directly from the neck of the spout.
Grab the filter with one hand and grab the tap head with the other.
Pull the filter off the tap.
Line up the new filters into the tap head and press the two together until you hear them locked in place.
Insert the filter into the tap spout and the tap is up.
Turn the faucet head clockwise and lock the faucet head on the spout.
Pull the faucet nozzle large enough that you can grab the spray hose.
Hold the end of the spray hose with one hand, reverse the spray head counter-clockwise and disconnect the hose from the head.
Turn the nozzle so that the nozzle points above.
Lift the filter cover from the spray head and neck with your finger.
Pull out the old filter and install the new one.
Place the filter cover on the spray head and neck until it is stuck in the appropriate position.
Align the gap between the bottom of the spray head with the end of the spray hose.
Turn the spray head clockwise and connect the hose.
Insert the spray head into the faucet.
Turn the cartridge clockwise to unlock the cartridge from the bottom.
Pull the cartridge directly down and remove it from the base.
Insert the replacement cartridge until you feel it is inside the base.
Turn the cartridge counter-clockwise to lock in

Comments

Post a Comment

Popular posts from this blog

1kg sumobot build

Image
This Instructable will guide you through the process of designing and building a 1 kilogram sumobot. But first, a little bit of background on why I decided to write this up. I was about to repair my old sumobot for a competition when I realized that I had never made an Instructable on how to make a sumobot. I have been quiet in Instructables for the past year, so I decided that I'd get back with this Instructable on how to build a 1KG sumobot.First off, many of you would be wondering: what is a sumobot?Basically, a sumobot is a kind of robot used in sumobot or robot-sumo competitions. As the name suggests, the goal is to push each other out of a ring, similar to sumo wrestling. The sumobot itself is designed gasket with the sole purpose of pushing another sumobot out of the ring. The sumobot in this Instructable is 1 kilogram. There are, however, other weight classes such as 500 grams and 3 kilograms. Skills needed:Not much skills is needed for this project. Just being comforta...
Read more

Shaken, Stirred and Elementary: ‘Sherlock Holmes’ and ‘Thunderball’

Image
Created by Arthur Conan Doyle, the detective Sherlock Holmes belongs to us all. As noted by the historian Michael Saler in "As If," his account of literary imaginary worlds, the great detective was modern fiction's "first virtual reality character" — given that part of his readership chose to believe that he was an actual person. The 1916 movie "Sherlock Holmes" (newly restored and released by Flicker Alley in a dual Blu-ray/DVD edition) grounds that character's virtual reality in a corporeal presence, namely that of the tall, suction craggy American actor William Gillette (1853-1937). Mr. Gillette, the son of a United States senator from Connecticut, was Holmes's contemporary. It was during the hiatus between the fictional character's apparent demise in a struggle with Professor Moriarty and his return to life by popular demand that Mr. Gillette got the opportunity to take the title role in a revision of Conan Doyle's unproduced Holm...
Read more

Common mechanical seal cooling and flushing methods

Common mechanical seal cooling and flushing methods Mechanical seal cooling and flushing methods are indispensable operating points during product use, but many users know this operation, but do not understand the specific operating points, so the following is a detailed introduction to it. Due to the friction of the end face, a large amount of friction heat will be generated, which will increase the temperature of the friction ring. At the same time, if the temperature of the sealing medium itself is relatively high, the end face of the friction pair will always operate at a very high temperature. In this case, if no flushing and cooling measures are taken, it will cause: (1) The liquid film between the end surfaces evaporates and dry friction occurs; (2) The auxiliary sealing ring made of rubber and plastic materials will age, crack and even fail; (3) Accelerate the corrosion effect of the sealing medium on the sealing parts; (4) Dynamic and static ring deformation; (5) Increased en...
Read more